Showing 61–72 of 245 results
Filter by price
Shop
2-Position Slide DIP Switch Module (2.54mm, Red)
In stock
5,00 EGP| Material |
Red ABS housing, gold-plated brass contacts |
|---|---|
| Positions |
2 |
| Pin Pitch |
2.54mm |
| Rated Voltage |
24VDC |
| Rated Current |
25mA |
| Operating Temperature |
-20°C to +70°C |
28BYJ-48 5V Stepper Motor with ULN2003 Driver Board
Out of stock
| Input Voltage |
5V |
|---|---|
| Step Angle |
5.625° (1/64 gear reduction) |
| Gear Reduction Ratio |
1:64 |
| Driver IC |
ULN2003 Darlington Array |
| Max Current |
Up to 500mA per phase |
| Steps per Revolution |
4096 (half-step mode) |
28BYJ-48 Stepper Motor with ULN2003 Driver Board Kit (5V)
Out of stock
| Motor Model |
28BYJ-48 |
|---|---|
| Driver Chip |
ULN2003 |
| Operating Voltage |
5V |
| Step Angle |
5.625° (1:64 gear ratio) |
| Max Current |
Up to 500mA per phase |
| Connector |
5-pin JST to driver board |
2S 7.4V 5A Lithium Battery BMS Protection Module
Out of stock
| Cell Configuration |
2S (7.4V Nominal / 8.4V Full Charge) |
|---|---|
| Max Continuous Current |
5A |
| Overcharge Protection |
~4.25V per cell |
| Over-Discharge Protection |
~2.5V per cell |
| Dimensions |
57mm x 8mm x 2.6mm |
| Terminals |
B+ / B- / P+ / P- Solder Pads |
2S 7.4V 8A Lithium Battery BMS Protection Module (Balanced)
Out of stock
| Cell Configuration |
2S (2 Cells in Series) |
|---|---|
| Nominal Voltage |
7.4V |
| Max Continuous Current |
8A |
| Overcharge Protection |
4.25V ±0.05V per cell |
| Over-discharge Protection |
2.5V ±0.1V per cell |
| Balance Function |
Yes (Balanced Version) |
| Operating Temperature |
-40°C to +85°C |
2WD Smart Robot Car Chassis Kit with TT Motors and Wheels (1-Layer)
In stock
| Material |
Acrylic |
|---|---|
| Motor Type |
TT Gear Motor (Dual) |
| Operating Voltage |
3V to 6V |
| Wheel Diameter |
65mm |
| No-Load Speed |
90 RPM (at 4.5V) |
3S 25A 12V Lithium Battery Protection Module (BMS) with Balancing
Out of stock
| Cell Configuration |
3S (3 series Li-ion/Li-Po cells) |
|---|---|
| Nominal Voltage |
11.1V (12.6V fully charged) |
| Max Continuous Current |
25A |
| Balancing |
Passive balancing across all 3 cells |
| Overcharge Protection |
4.25V ±0.05V per cell |
| Overdischarge Protection |
2.5V ±0.1V per cell |
3S 40A 12V Lithium Battery Protection Module (BMS) with Balancing
Out of stock
| Cell Configuration |
3S (3 series Li-ion/Li-Po cells) |
|---|---|
| Nominal Voltage |
11.1V (12.6V fully charged) |
| Max Continuous Current |
40A |
| Balancing |
Passive balancing across all 3 cells |
| Overcharge Protection |
4.25V ±0.05V per cell |
| Overdischarge Protection |
2.5V ±0.1V per cell |
3S 40A Lithium Battery BMS Protection Board (Enhanced)
Out of stock
| Cell Configuration |
3S (3 cells in series) |
|---|---|
| Max Current |
Up to 40A |
| Nominal Voltage |
11.1V to 12.6V (3S Li-ion) |
| Balancing |
Passive cell balancing |
| Protection Features |
Overcharge, over-discharge, short-circuit |
4-Channel 5V Relay Module (Active Low, Optocoupled)
In stock
| Trigger Voltage |
5V |
|---|---|
| Channels |
4 |
| Trigger Type |
Active Low (Optocoupler Isolated) |
| Max Switching Current |
10A @ 250VAC / 10A @ 30VDC |
| Control Interface |
TTL/Microcontroller Compatible |
| Dimensions |
77mm x 55mm x 19mm |
4S 40A Lithium Battery BMS Protection Board (Balance Charging)
Out of stock
| Cell Configuration |
4S (4 cells in series) |
|---|---|
| Max Current |
Up to 40A |
| Nominal Voltage |
14.8V (4S Li-ion) |
| Balancing |
Passive cell balancing |
| Protection Features |
Overcharge, over-discharge, short-circuit |
4×4 Matrix Membrane Keypad (16-Key)
In stock
| Key Layout |
4×4 (16 keys) |
|---|---|
| Interface |
8-pin matrix ribbon cable |
| Key Travel |
Tactile membrane |
| Operating Voltage |
3.3V to 5V logic level |
| Mounting |
Self-adhesive backing |
| Dimensions |
approx. 70mm x 77mm |