Showing 337–348 of 375 resultsSorted by popularity
MG995 High-Torque Servo Motor (Metal Gear)
In stock
Original price was: 210,00 EGP.175,00 EGPCurrent price is: 175,00 EGP.| Rotation Angle |
0° to 180° |
|---|---|
| Torque |
8.5 kg.cm (at 4.8V) / 10 kg.cm (at 6V) |
| Speed |
0.2 s/60° (at 4.8V) |
| Operating Voltage |
4.8V to 7.2V |
| Dimensions |
40.7mm x 19.7mm x 42.9mm |
| Weight |
55g |
3S 40A 12V Lithium Battery Protection Module (BMS) with Balancing
In stock
Original price was: 110,00 EGP.90,00 EGPCurrent price is: 90,00 EGP.| Cell Configuration |
3S (3 series Li-ion/Li-Po cells) |
|---|---|
| Nominal Voltage |
11.1V (12.6V fully charged) |
| Max Continuous Current |
40A |
| Balancing |
Passive balancing across all 3 cells |
| Overcharge Protection |
4.25V ±0.05V per cell |
| Overdischarge Protection |
2.5V ±0.1V per cell |
3S 25A 12V Lithium Battery Protection Module (BMS) with Balancing
In stock
Original price was: 105,00 EGP.85,00 EGPCurrent price is: 85,00 EGP.| Cell Configuration |
3S (3 series Li-ion/Li-Po cells) |
|---|---|
| Nominal Voltage |
11.1V (12.6V fully charged) |
| Max Continuous Current |
25A |
| Balancing |
Passive balancing across all 3 cells |
| Overcharge Protection |
4.25V ±0.05V per cell |
| Overdischarge Protection |
2.5V ±0.1V per cell |
DC-DC Step-Up Boost Converter Module 1A
In stock
Original price was: 55,00 EGP.45,00 EGPCurrent price is: 45,00 EGP.| Input Voltage |
2V to 24V |
|---|---|
| Output Voltage |
5V to 28V (adjustable) |
| Output Current |
Up to 1A |
| Efficiency |
Up to 93% |
| Dimensions |
43mm x 21mm x 14mm |
PCB Prototype Board FR4 7x10cm (Dotted/Isolated Pads)
Out of stock
21,00 EGP| Material |
FR4 Fiberglass Epoxy |
|---|---|
| Dimensions |
70mm x 100mm |
| Pin Count |
2.54mm (0.1 in) Hole Pitch |
| Copper Pattern |
Individually Isolated Dot Pads |
| Rated Voltage |
1.6mm Thickness |
PCB Prototype Board FR4 10x15cm (Dotted/Isolated Pads)
Out of stock
Original price was: 50,00 EGP.39,00 EGPCurrent price is: 39,00 EGP.| Material |
FR4 Fiberglass Epoxy |
|---|---|
| Dimensions |
100mm x 150mm |
| Pin Count |
2.54mm (0.1 in) Hole Pitch |
| Copper Pattern |
Individually Isolated Dot Pads |
| Rated Voltage |
1.6mm Thickness |
PCB Prototype Board FR4 7x10cm (Copper Strip Lines)
Out of stock
22,00 EGP| Material |
FR4 Fiberglass Epoxy |
|---|---|
| Dimensions |
70mm x 100mm |
| Pin Count |
2.54mm (0.1 in) Hole Pitch |
| Copper Pattern |
Continuous Copper Strip Lines |
| Rated Voltage |
1.6mm Thickness |
PCB Prototype Board FR4 10x15cm (Copper Strip Lines)
Out of stock
25,00 EGP| Material |
FR4 Fiberglass Epoxy |
|---|---|
| Dimensions |
100mm x 150mm |
| Pin Count |
2.54mm (0.1 in) Hole Pitch |
| Copper Pattern |
Continuous Copper Strip Lines |
| Rated Voltage |
1.6mm Thickness |
USB to TTL UART Uploader CH340
Out of stock
Original price was: 80,00 EGP.60,00 EGPCurrent price is: 60,00 EGP.| Chipset |
CH340G |
|---|---|
| Input Voltage |
3.3V / 5V |
| Baud Rate |
Up to 2Mbps |
| Interface |
USB to TTL |
| Connectors |
4-pin header (VCC, TX, RX, GND) |
| Dimensions |
57mm x 17mm x 7mm |
| Weight |
4g |
A2212 Brushless Motor 2200KV
Out of stock
Original price was: 400,00 EGP.320,00 EGPCurrent price is: 320,00 EGP.| KV Rating |
2200KV |
|---|---|
| Input Voltage |
2-3S LiPo (7.4V – 11.1V) |
| Max Current |
30A |
| Max Power |
350W |
| Shaft Diameter |
3.17mm |
| Motor Dimensions |
28mm x 26mm |
| Weight |
50g |
| Mounting Hole Distance |
16mm and 19mm |
Micro Servo Continuous Rotation MG90S
In stock
Original price was: 240,00 EGP.190,00 EGPCurrent price is: 190,00 EGP.| Rotation Angle |
360° Continuous |
|---|---|
| Torque |
2.2 kg.cm (at 4.8V) |
| Speed |
0.12 s/60° (at 4.8V) |
| Operating Voltage |
4.8V – 6.0V |
| Dimensions |
22.8 x 12.2 x 28.5 mm |
| Weight |
13.4 g |
ESC Speed Controller for Brushless Motor 30A
Out of stock
Original price was: 385,00 EGP.340,00 EGPCurrent price is: 340,00 EGP.| Max Current |
30A |
|---|---|
| BEC Output |
5V/2A |
| Input Voltage |
2-4S LiPo (7.4V-14.8V) |
| Dimensions |
55mm x 25mm x 8mm |