Showing 1–12 of 245 results
Filter by price
Shop
Arduino Uno R3 SMD
In stock
| Color |
Blue |
|---|---|
| Dimensions |
68.6 mm x 53.4 mm |
| Microcontroller |
ATmega328P |
| Operating Voltage |
5V |
| Input Voltage (limit) |
7-12V |
| Analog Input Pins |
6 |
| DC Current per I/O Pin |
40 mA |
| DC Current for 3.3V Pin |
50 mA |
| SRAM |
2 KB (ATmega328P) |
| Clock Speed |
16 MHz |
1-Channel 12V Relay Module
In stock
| Input Voltage |
12V |
|---|---|
| Relay Rating |
10A at 250VAC / 10A at 30VDC |
| Trigger Type |
Low-Level Trigger |
| Contact Type |
SPDT (NO/NC) |
| Indicator |
Power & Status LEDs |
| Dimensions |
50mm x 26mm x 19mm |
40-Pin Female to Male Dupont Jumper Wire Ribbon Cable (20cm)
In stock
30,00 EGP| Connector Type |
Female to Male Dupont |
|---|---|
| Pin Pitch |
2.54mm |
| Cable Length |
20cm |
| Wire Count |
40 |
| Rated Current |
1A per pin |
| Material |
PVC-insulated stranded copper wire |
Arduino Nano with CH340 Uploader – USB Type-C
In stock
| Microcontroller |
ATmega328P |
|---|---|
| Operating Voltage |
5V |
| Digital I/O Pins |
14 (6 PWM outputs) |
| Analog Input Pins |
8 |
| Flash Memory |
32 KB (ATmega328P) of which 2 KB used by bootloader |
| SRAM |
2 KB (ATmega328P |
| EEPROM |
1 KB (ATmega328P) |
| Clock Speed |
16 MHz |
| Color |
Blue |
| Dimensions |
45 mm x 18 mm x 6 mm |
Arduino Pro Mini 5V 16MHz A-STAR Version
In stock
| Microcontroller |
ATmega328P |
|---|---|
| Color |
Blue |
| Operating Voltage |
5V |
| Digital I/O Pins |
14 (6 PWM outputs) |
| Analog Input Pins |
8 |
| DC Current per I/O Pin |
40 mA |
| Flash Memory |
32 KB (ATmega328P) of which 2 KB used by bootloader |
| Clock Speed |
16 MHz |
| Dimensions |
33 mm x 18 mm x 2 mm |
Arduino Uno R3
In stock
| Color |
Blue |
|---|---|
| Dimensions |
68.6 mm x 53.4 mm |
| Microcontroller |
ATmega328P |
| Operating Voltage |
5V |
| Nput Voltage (limit) |
6-20V |
| Digital I/O Pins |
14 (6 PWM outputs) |
| Analog Input Pins |
6 |
| Flash Memory |
32 KB (ATmega328P) of which 0.5 KB used by bootloader |
| SRAM |
2 KB (ATmega328P) |
| EEPROM |
1 KB (ATmega328P) |
| Clock Speed |
16 MHz |
BMP180 GY-68 Barometric Pressure Sensor Module
In stock
| Sensor Chip |
BMP180 |
|---|---|
| Supply Voltage |
3.3V to 5V |
| Interface |
I2C |
| Pressure Range |
300 hPa to 1100 hPa |
| Operating Temperature |
-40°C to +85°C |
| Altitude Resolution |
0.25m |
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module 5V
Out of stock
| Supply Voltage |
3.3V to 5V |
|---|---|
| Communication Interfaces |
I2C and SPI |
| Pressure Range |
300 to 1100 hPa |
| Pressure Accuracy |
±1 hPa |
| Altitude Range |
-1000 to 9000 meters |
| Altitude Accuracy |
±1 meter |
| Operating Temperature |
-40°C to +85°C |
Breadboard 830 Point
In stock
50,00 EGP| Material |
Stainless steel |
|---|---|
| Dimensions |
165 x 55 x 10mm |
Color Sensor Recognition Module GY-31 TCS3200
In stock
| Supply Voltage |
3.3V to 5V |
|---|---|
| Output Signal |
Frequency output proportional to the detected color intensity |
| Color Detection |
Red, Green, Blue, and Clear channels |
| Frequency Range |
Programmable to fit different sensitivity requirements |
| Interface |
Digital output through frequency signal |
DC Motor Dual Shaft 600RPM with Wheel
In stock
50,00 EGP| Voltage Range |
3-12V DC |
|---|---|
| Speed |
600 RPM |
| Wheel Diameter |
65mm |
| Shaft Type |
Dual Shaft |