Showing 73–84 of 375 resultsSorted by popularity
Filter by price
Shop
IR Photoelectric Motor Speed Encoder Sensor Module 4-Pin
In stock
| Supply Voltage |
3.3V to 5V |
|---|---|
| Output Type |
Digital (TTL, via LM393 comparator) |
| Sensitivity Adjustment |
Onboard potentiometer |
| Detection Method |
Slot-type infrared interrupt |
| Interface |
4-Pin header |
| Operating Temperature |
-10°C to +60°C |
KY-008 Laser Transmitter Module 5V
In stock
30,00 EGP| Supply Voltage |
5V |
|---|---|
| Wavelength |
650nm (red) |
| Output Power |
5mW |
| Beam Type |
Dot |
| Interface |
3-Pin (Signal, VCC, GND) |
| Operating Temperature |
-10°C to +60°C |
DC Motor Dual Shaft 600RPM with Wheel
In stock
50,00 EGP| Voltage Range |
3-12V DC |
|---|---|
| Speed |
600 RPM |
| Wheel Diameter |
65mm |
| Shaft Type |
Dual Shaft |
Arduino Nano with CH340 Uploader – USB Type-C
In stock
| Microcontroller |
ATmega328P |
|---|---|
| Operating Voltage |
5V |
| Digital I/O Pins |
14 (6 PWM outputs) |
| Analog Input Pins |
8 |
| Flash Memory |
32 KB (ATmega328P) of which 2 KB used by bootloader |
| SRAM |
2 KB (ATmega328P |
| EEPROM |
1 KB (ATmega328P) |
| Clock Speed |
16 MHz |
| Color |
Blue |
| Dimensions |
45 mm x 18 mm x 6 mm |
B10K 10K Ohm Linear Taper Rotary Potentiometer (3-Pin)
In stock
6,00 EGP| Resistance |
10KΩ |
|---|---|
| Taper |
Linear (B) |
| Pin Count |
3 |
| Shaft Diameter |
6mm |
| Power Rating |
0.05W |
| Rotation Angle |
300° Mechanical |
ELM327 V2.1 OBD2 WiFi Interface Car Diagnostic Scanner
In stock
| Chipset |
ELM327 |
|---|---|
| Connectivity |
WiFi 802.11 b/g/n |
| OBD Protocols Supported |
ISO9141, KWP2000, J1850 PWM/VPW, CAN |
| Operating Voltage |
12V (vehicle OBD port) |
| Compatibility |
iOS, Android, Windows |
| Connector |
OBD-II 16-pin |
MQ-4 Methane & Natural Gas Sensor Module
In stock
80,00 EGP| Supply Voltage |
5V |
|---|---|
| Output Type |
Analog and Digital (TTL) |
| Detection Range |
300 to 10000 ppm (methane/CNG) |
| Sensitivity Adjustment |
Onboard potentiometer |
| Preheat Time |
Over 24 hours for stable readings |
| Sensing Element |
SnO2 (Tin Dioxide) |
MFRC522 RFID Reader/Writer Module 13.56MHz
In stock
| Chipset |
MFRC522 |
|---|---|
| Interface |
SPI |
| Operating Frequency |
13.56 MHz |
| Operating Voltage |
3.3V |
| Read Range |
Up to 5cm |
| Card Compatibility |
Mifare 1K / 4K / Ultralight |
MAX98357A I2S 3W Class D Audio Amplifier Breakout Module
Out of stock
| Amplifier IC |
MAX98357A |
|---|---|
| Output Power |
3.2W at 4 Ohm (10% THD) |
| Input Type |
I2S Digital Audio |
| Supply Voltage |
2.7V to 5.5V |
| Gain Options |
3dB to 15dB (5-Step) |
| Interface |
BCLK, LRC, DIN, GAIN, SD + Screw Terminal |
Joystick Shield for Arduino
In stock
| Compatibility |
Arduino Uno / Mega (shield form factor) |
|---|---|
| Joystick Type |
Dual-axis analog with push-button (Z-axis) |
| Buttons |
4 momentary + 1 reset |
| Operating Voltage |
5V |
| Interface |
Digital I/O + Analog (A0/A1) |
| Dimensions |
68mm x 53mm |
TT Gear Motor with Wheel Set (Yellow, 65mm, Pair)
In stock
| Input Voltage |
3V to 6V |
|---|---|
| Speed |
200 RPM (at 6V, no load) |
| Max Current |
Up to 250mA |
| Shaft Diameter |
5mm D-Shaft |
| Dimensions |
65mm Wheel Diameter x 27mm Width |
| Weight |
50g per Motor+Wheel |